Tag: led

NeoPixel Stick

Wiring Instructions To wire your ΝeoPixel Stick  to your Arduino, connect the following pins: Connect the VCC pin to 5 Volts (5V) Connect the GND pin to ground (GND) Connect the GND pin to ground (GND) Connect the DIN pin

Tagged with: , , , ,

Displaying text with a Led 8×8 Bi-color Matrix

Required Hardware Led Matrix 8×8 Bi-Color Arduino Board Breadboard Jumper Cables With this tutorial you learn how to connect and display the word “Hello” to Led Matrix 8×8. Below is the wiring that you need only for the red color.

Tagged with: , , , , , ,

Playing around with an LDR / Photo-resistor

Required Hardware Arduino Board LDR Resistor 10K Breadboard Jumper Cables The LDR / Photo-resistor is basically a very simple light sensor that changes its resistance with light, lowering with more light.

Tagged with: , , , ,