Year: 2018

3D Printed Robotic Arm

3D Printed Robotic Arm Wiring Instructions Required Hardware Servo Driver Arduino Servo Motor Joystick Buzzer Push Button Toggle Switch Red Led Green Led Led Holders PSU Recommended Software Arduino IDE Instructions and Code STEP 1 Head to   thingiverse  download the

Tagged with: , , ,

RF Link Transmitter and Receiver – 433MHz

In this two tutorial we will Transmit data from an Arduino to another Arduino using the RF 433Mhz Module Wiring Instructions To wire your RF link Transmitter to your Arduino, connect the following pins: Connect the VCC pin to 5

Tagged with: , , ,

Wireless distance measuring with ultrasonic

In this Arduino tutorial you will learn how to make a wireless communication between two Arduino boards using the NRF24L01. Also you can measure distance with ultrasonic sensor and transmit it to another Arduino with transceiver module. Wiring Instructions To

Tagged with: , , ,

NeoPixel Stick

Wiring Instructions To wire your ΝeoPixel Stick  to your Arduino, connect the following pins: Connect the VCC pin to 5 Volts (5V) Connect the GND pin to ground (GND) Connect the GND pin to ground (GND) Connect the DIN pin

Tagged with: , , , ,

Quadruple 8×8 led matrix with MAX7219

   In this tutorial you will learn how to use the Quadruple 8×8 led matrix with MAX7219. With this code a scrolling text will appear containing various characters. Wiring Instructions To wire your LED matrix to your Arduino, connect the following

Tagged with: , , ,

Bluetooth module AT-09

With this tutorial you can send data from your android phone to AT-09 (via the Serial Bluetooth Terminal app)and read it from the Arduino IDE  serial monitor .As a bonus if you send “0” the led on Arduino will turn off

Tagged with: , ,

RF 433 Module 4 Channels

 With this tutorial you will learn how to use the RF 433 Module 4 Channels with Arduino Uno and 4 led’s. The Arduino takes a serial command from serial monitor and depending on the command it toggles the RF module

Top