Arduino UNO WiFi

Arduino Uno WiFi

Arduino Uno WiFi

The UNO WiFi board is the Arduino UNO with integrated WiFi. For beginner and advanced users alike.

The Arduino UNO WiFi board is based on the ATmega328 and it has an integrated ESP8266 WiFi Module. If you are starting out with Arduino, or starting with IoT, this is the board to get.

 

Αποκτήστε το από το ηλεκτρονικό μας κατάστημα http://grobotronics.com/arduino-uno-wifi.html

 

The Arduino Uno Wi-Fi is the new Arduino Uno with an integrated Wi-Fi module! The board is based on the ATmega328P (datasheet) with an ESP8266 Wi-Fi Module integrated (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.

The ESP8266 Wi-Fi Module is a self contained SoC with integrated TCP/IP protocol stack that can give access to your Wi-Fi network. (Or the device can act as an access point.) One useful feature of Uno Wi-Fi is support for OTA (over-the-air) programming, either for transfer of Arduino sketches or Wi-Fi firmware.

ARDUINO MICROPROCESSOR
Processor ESP8266
Architecture Tensilica Xtensa LX106
Operating Voltage 3.3 V
Flash Memory 4 MB
RAM 8 MB instruction, 12 MB data
Clock Speed 80 MHz
WiFi 802.11 b/g/n 2.4 GHz
Wake up time < 2 ms

 

ARDUINO MICROCONTROLLER
Microcontroller ATmega328
Architecture Atmel AVR 8-bit
Operating Voltage 5 V
Flash memory 32 KB
SRAM 2 KB
Clock Speed 16 MHz
Analog I/O Pins 6
EEPROM 1 KB
DC Current per I/O Pins 40 mA

 

GENERAL
Digital I/O Pins 20
PWM Output 6
Power Consumption 93 mA
PCB Size 53 x 68.5 mm
Weight 0.025 Kg
Product Code A000133
Posted in News Tagged with: , , , ,